xtouch s20 mt6739 flash file

winstar wbx-1 mt6582 flash file new 2020-2021

winstar wbx-1 mt6582 flash file new 2020-2021

*winstar wbx-1 flash file download

* winstar wbx-1 mt6582 flash file download

* winstar wbx-1 firmware download

* winstar wbx-1 deadrecovery file download

* winstar wbx-1 pattern lock-pin lock-password lock remove file download

* winstrar wbx-1 frp lock remove file downlaod

* winstar wbx-1 white lcd fixed file download

* winstar wbx-1 hang on logo flash file download

                                        Orginal file                      

                Click here to download                        

Readinfo:

 Card found : S/N : 1CAD1D33 , v0148

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Device boot not done

Check Drivers

Try again 

Boot Error!

Operation Failed

Elapsed: 00:00:30

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 6 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6582

BB_CPU_NME : [MediaTek] MT6582_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x87

NAND Flash : NOT INSTALLED

eMMC Flash : 1501004B3758564D420131FEC6357195

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7

[eMMC] : FLASH_CID : 1501004B3758564D420131FEC6357195

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000

[eMMC] : FLASH_LEN : 0x00000001D2000000

[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]

DEV RID    : 0x64FB2921C1D6C5E2ACFFB87D369FFC4E

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

Brand     : WBX-1

ProdName  : full_q15_jj_h3a_wbx1_emmc64_8_ddr2_b15

ProdModel : S6

Device    : q15_jj_h3a_wbx1_emmc64_8_ddr2_b15

AndroidVer: 5.0.2

MTKxCPU   : MT6582

MTKxPRJ   : DW_Q15_64V8_B15_FWJ_JJ_H3A_Winstar_WBX_1_V1.0

[Read Ok] : preloader_q15_jj_h3a_wbx1_emmc64_8_ddr2_b15.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / q15_jj_h3a_wbx1_emmc64_8_ddr2_b15 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1045 MiB

Scatter saved to : C:\Users\brighton telecom\Documents\MT6582__WBX-1__S6__q15_jj_h3a_wbx1_emmc64_8_ddr2_b15__5.0.2__DW_Q15_64V8_B15_FWJ_JJ_H3A_Winstar_WBX_1_V1.0\

All done!

Done!

Elapsed: 00:07:17

Reconnect Power/Cable!

G-phone model A10 mt6570 flash file

 G-phone model A10 mt6570 flash file

 

*G-phone A10 flash file

* G-phone A10 firmware

* G-phone A10 mt6570 flash file

*G-phone A10 mediatek flash file

 * G-phone A10 dead recovery flash file

* G-phone A10 white lcd flash file

*G-phone A10 Suddenly power off flash file

* G-phone A10 unfortunatley work spoted flash file

* G-phone Hang logo flash file

* G-phone cm2 readed flash file

                            Click here to download                            

G-phone A10 mt6570 flash file Readinfo:


Operation : Identify [ v2.12 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Read Firmware [ v2.12 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1944 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6570
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00018000 [ 96.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        EMMC: 90014A4838473165507558B921DC39D
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : H8G1e
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x1D2000000 [ 7.28 GB ]

        CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 33E13D8DA21639A9AA997A31B57

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : A10_A812EBZ_V203E3_2020052915051590738377
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-03-05
Build Time     : 1590738377
Product Model  : A10
Product Brand  : G phone
Product Name   : A10
Product Device : A10
Product Manfct : G phone
Board Platform : mt6570
Product Info   : A10

MT6570__G_phone__A10__6.0__A10_A812EBZ_V203E3_2020052915051590738377__MRA58K__A10

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : md1rom.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 15%
Read : cache.img
Read : userdata.img

FW Size  : 1.36 GB
Android Info saved : _Android_info.txt
Scatter  : MT6570_Android_scatter.txt
Saved to : D:\flash file\G-phone\MT6570__G_phone__A10__6.0__A10_A812EBZ_V203E3_2020052915051590738377__MRA58K__A10\

Done!
Elapsed: 00:05:05

Symphony B66 sc6531e flash file

 Symphony B66 sc6531e flash file

 

* symphony b66 flash file

* symphony b66 sc6531e flash file

* symphony b66 firmware

* symphony b66 firmware download

* symphony b66 flash file download

* symphony b66 dead recovery flash file

* symphony b66 password remove flash file

 

 

 

 

                          Click here to download                             

Winstar W50 sc6531e flash file

 Winstar W50 sc6531e flash file

 

 

* winstar w50 flash file

*winstar w50 password remove file

*winstar w50 hang logo flash file

*winstar Dead recovery flash file

*winstar w50 sc6531e new model flash file

 

 

 

                                  Click here to download                                                

Download DA file for cm2 mtk 1.58 Support android 7

Download DA file for cm2 mtk 1.58 Support android 7

cm2 mtk 1.58 DA Error solution

just change DA or boot file on your installed folder

                                Click here to download                                

Hotwav venus mt6580 flash file

 

Hotwav venus mt6580 flash file

 --------------------------------------------------

Brighton Telecom

__________________________

সঠিক ফাইলের নিশ্চয়তা

----------------------------------------

MT6580__Venus__Venus__6.0__T9-TG-B18-V001-20190312__MRA58K__zechin6580_weg_m

* hang on logo fixed

* white lcd fixed

* suddenly power off fixed

* unfortunately has stoped work fixed

* monkey virus remove fixed

* dead fixed

* frp lock fixed

* pattern lock fixed

* slow working fixed

------------------------------------------------------------------------------------------------

only for paid

click here to download

hotwav venus flash file

hotwav venus mt6580 flash file

hotwav venus non removable battery flash file

hotwav vunus firmware file

hotwav vunus dead recovery file

hotwav venus white lcd fixed file

hotwav venus dead recovery firmware file

hotwav venus flash file download

hotwav venus non removable battery

Winstar w68 cm2 readed file

 

 winstar w68 2nd file

if you want to download  winstar w68 1st file pls go this link

https://brightontelecom.blogspot.com/2020/09/winstar-w68-mt6580-flash-file.html

Winstar w68 dead recovery file

******************************

Brand:        Winstar

Model:    w68

Cpu:        mtk6580

এই ফাইলটি সম্পূর্ণ একটি রাংনিং মোবাইল থেকে রিড করে নেয়া হয়েছে।

তাই মোবাইল ডেড হওয়ার কোন সম্ভবনা নেই। 

See video:-

https://youtu.be/ilnck602zco

                                                    Click here to download   link 01                                                     

                                                    Click here to download   link 02                                    

Download winstar w68 1st file

https://brightontelecom.blogspot.com/2020/09/winstar-w68-mt6580-flash-file.html

[o] Take a back up, if you are going to flash or install the above  firmware on the Winstar W68 device, then take a back up of everything because your data will be removed or deleted post flashing or installing the firmware.

Symphony P8 Pro mt6580 flash file

 

 --------------------------------------------------

Brighton Telecom

__________________________

সঠিক ফাইলের নিশ্চয়তা

----------------------------------------

* hang on logo fixed

* white lcd fixed

* suddenly power off fixed

* unfortunately has stoped work fixed

* monkey virus remove fixed

* dead fixed

* frp lock fixed

* pattern lock fixed

* slow working fixed

------------------------------------------------------------------------------------------------

এই ফাইলটি তাদের জন্য যারা ফ্ল্যাশ করে ডিসপ্লে সাদা করে ফেলেছেন 

ফ্রী ফাইল দিয়ে ফ্ল্যাশ করে যারা মোবাইল ডেড করে ফেলেছেন তাদের জন্য এই ফাইলটি...

                                                           Click here to download                              

How to flash symphony p8 pro mt6580

* Download and extract flash file on your computer

* Download and install mtk usb driver on your computer. (if already installed skip it)

* Download  sp flash tool. ( if you have any flashing device skip it)

* Open sp flash tool and select scatter file you have downloaded.

* Click download

* Now connect your mobile phone with computer via usb cable

* Battery charge must be 50% or up needed to flash a mobile

* After finish download remove usb cable and remove battery and insert battery again and switch on phone

symphony p8 pro flash file readed info:

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Device boot not done

Check Drivers

Try again 

Boot Error!

Operation Failed

Elapsed: 00:00:30

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x01000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : SIGNED with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9C

NAND Flash : NOT INSTALLED

eMMC Flash : 90014A484147346132A53285722784CF

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , 2a4GA

[eMMC] : FLASH_CID : 90014A484147346132A53285722784CF

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003AB400000

[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]

DEV RID    : 0x64FB29218FB34F17459A837B876130C1

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [2 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Symphony

ProdName  : P8_PRO

ProdModel : P8 PRO

Device    : P8_PRO

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : alps-mp-n0.mp2-V1_tinno6580.we.n_P136

[Read Ok] : preloader_v3760.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3760 / EMMC

Android Info saved

HWConfig Info saved

FW Size : 2508 MiB

Scatter saved to : G:\Symphony\MT6580__Symphony__P8_PRO__P8_PRO__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136\

All done!

Done!

Elapsed: 00:14:04

Reconnect Power/Cable!

      

Symphony B12+ HW3 sc6531e flash file

 

Symphony B12+ HW3 sc6531e flash file

*symphony b12+ hw3 flash file download

* symphony b12+ hw3 firmware

* symphony b12+ hw3 password unlock flash file

* symphony b12+ hw3 white lcd flash file

* symphony b12+ hw3 half lcd flash file

* symphony b12+ hw3 imei repair flash file

* symphony b12+ hw3 dead recovery file

 --------------------------------------------------

Brighton Telecom

__________________________

সঠিক ফাইলের নিশ্চয়তা

----------------------------------------

                                        Click here to download                            

How to flash or Unlock password of symphony b12+ hw3 version:

* download and extract file on your computer

* after extract you will get firmware and spd flash tool

* download and install spd usb driver on your computer ( if already installed skip it)

* open spd flash tool

* click load tab and select flash file you have downloaded it

* now click start 

* check your mobile phone battery are 50% chareged or up

* insert battery and connect with computer via usb cable

* now you can see downloading pannel

* after download completed remove cable 

* then switch on mobile

symphony b12+ hw3 readed info:

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Read Flash [ v1.06 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR 6531EFM v2.0 (c)2019

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

FF257M80_G10_CQ_SYMPHONY_CQ1819S_BENGAL_AUDIO_NV_V18_128X160_EN_BE_20190905_110108

Project Version:   SC6531EFM_BAR

MMI Version:       SC6531EFM_BAR

BASE  Version:     BASE_SVN

HW Version: SC6531EFM_BAR

08-27-2019 15:45:55

LOG Version:      V1.0.1

UCOM

Saved to : G:\Symphony\Button\New folder\FF257M80_G10_CQ_SYMPHONY_CQ1819S_BENGAL_AUDIO_NV_V18_128X160_EN_BE_20190905_110108.bin

Done!

Elapsed: 00:03:50

Reconnect Power/Cable!

Symphony i97 hw1 flash file spd9863A

 --------------------------------------------------

Brighton Telecom

__________________________

সঠিক ফাইলের নিশ্চয়তা

----------------------------------------

Symphony i97 hw1 flash file spd9863A  (orginal file)

Caution

This is CM2 readed file, bin file, spd flash tool not supported for this file,,,, only cm2 or umt pro or miracle crack or other supported device can flash this file.

----------------------------------------------------------------------

* hang on logo fixed

* white lcd fixed

* suddenly power off fixed

* unfortunately has stoped work fixed

* monkey virus remove fixed

* dead fixed

* frp lock fixed

* pattern lock fixed

* slow working fixed

------------------------------------------------------------------------------------------------

                                    Click here to download                                

Tags:

symphony i97 frp remove file

symphony i97 flash file

symphony i97 firmware

symphony i97 dead recovery flash file

symphony i97 flash file without password

symphony i97 spd9863a flash file

symphony i97 spd 9863a firmware

symphony i97 white lcd fixed flash file

symphony i97 blue lcd flash filoe

symphony cm2 readed file

symphony i97 flash file free download

symphony i97 firmware file free download

symphony i97 read cm2 read info:

Flash file readed info:

----------------------------

Operation : Read FW [ v2.07 ]

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS

Sending Init Boot ... 

Boot sent!

Kick FDL ... 

BootVersion : Spreadtrum Boot Block version 1.1

Protocol setup ... 

Port speed : 921600

Sending Flash Boot ... 

Boot sent!

Kick FLASH FDL ... 

FDL : 0x0004

FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True

FDL : Control transfered!

Boot Done!

Device info : 

Patch Level    : PPR1.180610.011

Display ID     : i97_HW1_V8

Ver. Incmt     : 113

Ver. CodeName  : REL

Ver. Release   : 9

Sec. Patch     : 2019-07-01

Build Time     : 08.07.2019

Product Model  : i97

Product Brand  : Symphony

Product Name   : i97

Product Device : i97

Product Manfct : Symphony

Product Info   : i97

Product Board  : sp9863a_3h10

Board Platform : sp9863a

AndroidVer : 9

VlnrLevel : 0x02

SP9863A__Symphony__i97__9__i97_HW1_V8__PPR1.180610.011__i97

Read : u-boot.bin

Read : sml.bin

Read : tos.bin

Read : vbmeta.img

Read : dtb.img

Read : dtbo.img

Read : ldsp_l.bin

Read : gdsp_l.bin

Read : modem_l.bin

Read : nvitem_l.bin

Read : modem_wcn.img

Read : gnssmodem.bin

Read : gnssbdmodem.bin

Read : pm_sys.bin

Read : boot.img

Read : recovery.img

Make : persist.img

Read : boot_logo.bmp

Read : fastboot_logo.bmp

Read : system.img

Read : vendor.img

Read : otp_product.img

ExtSparse : Compression ratio : 1%

Make : userdata.img

Make : cache.img

Read : prodnv.img

ExtSparse : Compression ratio : 12%

Read : deltanv_l.bin

Read : phase.cfg

Read : u-boot-spl.bin

Firmware size : 0xEB584CA8 ( 3.68 GiB )

Android Info saved : _Android_info.txt

Reconnect Power/Cable!

Done!

Elapsed: 00:37:42

==============================================================================

==========================================================================

Card found : 1CAD1D33 , v0146

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.07

Load IDBase v8331 Ok!

Operation : Identify [ v2.07 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!

Wait for device ... 

Device not found!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.07 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!

Wait for device ... 

Device Connected!

ERROR : Protocol HandShake failed!

Error : Fail to init protocol!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.07 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS

Sending Init Boot ... 

ERROR : FDL Start Failed!

Error : Fail to boot FDL!

Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.07 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS

Sending Init Boot ... 

Boot sent!

Kick FDL ... 

BootVersion : Spreadtrum Boot Block version 1.1

Protocol setup ... 

Port speed : 921600

Sending Flash Boot ... 

Boot sent!

Kick FLASH FDL ... 

FDL : 0x0004

FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True

FDL : Control transfered!

Boot Done!

Device info : 

Patch Level    : PPR1.180610.011

Display ID     : i97_HW1_V8

Ver. Incmt     : 113

Ver. CodeName  : REL

Ver. Release   : 9

Sec. Patch     : 2019-07-01

Build Time     : 08.07.2019

Product Model  : i97

Product Brand  : Symphony

Product Name   : i97

Product Device : i97

Product Manfct : Symphony

Product Info   : i97

Product Board  : sp9863a_3h10

Board Platform : sp9863a

Platform Version: MOCORTM_18B_W19.10.2_P8_Debug

Project Version:   sharkl3_pub

BASE  Version:    FM_BASE_18B_W19.10.2_P8

HW Version:        sc9863A_modem

CMP_Time : 05-11-2019 15:24:10

MODEM TAG : MOCORTM_18B_W19.10.2_P8_Debug_FM_BASE_18B_W19.10.2_P8_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!

Elapsed: 00:03:02

Lava iris 51 sp7731e flash file download

 

                Lava iris 51 sp7731e cm2 readed flash file (original)

--------------------------------------------------

Brighton Telecom

__________________________

সঠিক ফাইলের নিশ্চয়তা

----------------------------------------

Caution

This is CM2 readed file, bin file, spd flash tool not supported for this file,,,, only cm2 or umt pro or miracle crack or other supported device can flash this file.

----------------------------------------------------------------------

* hang on logo fixed

* white lcd fixed

* suddenly power off fixed

* unfortunately has stoped work fixed

* monkey virus remove fixed

* dead fixed

* frp lock fixed

* pattern lock fixed

* slow working fixed

------------------------------------------------------------------------------------------------

                                                    Click here to download                                

Lava iris 51 readed info:

Operation : Identify [ v2.08 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS

Sending Init Boot ... 

Boot sent!

Kick FDL ... 

BootVersion : Spreadtrum Boot Block version 1.1

Protocol setup ... 

Port speed : 921600

Sending Flash Boot ... 

Boot sent!

Kick FLASH FDL ... 

FDL : 0x0002

FDL : Control transfered!

Boot Done!

Device info : 

Patch Level    : OPM2.171019.012

Display ID     : LAVA_iris51_1_8_S127_INT_19L23

Ver. Incmt     : 51116

Ver. CodeName  : REL

Ver. Release   : 8.1.0

Sec. Patch     : 2020-01-05

Build Time     : 23.12.2019

Product Model  : iris51

Product Brand  : LAVA

Product Name   : iris51

Product Device : iris51

Product Manfct : LAVA

Product Info   : iris51

Product Board  : cm05_64v8

Board Platform : sp7731e

Platform Version: MOCORTM_17C_W18.23.4_P7_Debug

Project Version:   pike2_pub

BASE  Version:    FM_BASE_17C_W18.23.4_P7

HW Version:        sc7731e_modem

CMP_Time : 08-17-2018 12:44:48

MODEM TAG : MOCORTM_17C_W18.23.4_P7_Debug_FM_BASE_17C_W18.23.4_P7_sc7731e_modem_pike2_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!

Elapsed: 00:02:25

Tags:

lava iris 51 flash file

lava iris 51 sp7731e flash file

lava iris 51

lava iris 51 flash file free download

lava iris 51 flash file without password

lava iris 51 firmware download

lava iris 51 firmware

lava iris 51 firmware without password

lava iris 51 sp7731e flash file without password

lava iris 51 white lcd flash file

lava iris 51 white lcd fixed flash file

lava iris 51 hang logo fixed flash file

lava iris 51 monkey virus remove flash file

Symphony B24 sc6531e flash file

 Symphony B24 sc6531e flash file

Brand:            Symphony
Model:            B24
Cpu:                sc6531e

--------------------------------------------------

Brighton Telecom

__________________________

সঠিক ফাইলের নিশ্চয়তা

----------------------------------------

* symphony b24 flash file

* symphony b24 firmware

* symphony b24 white lcd solutiojn

* symphony b24 half lcd solution

* symphony b24 password unlock

* symphony b24 dead recovery file

* symphony b24 sc6531e flash file

                            Click here to download flash file                                     

                Click here to download usb driver                                       

                        Click here to download spd flash tool                         

সিম্পোনি b24 ফ্ল্যাশ করতে অথবা পাসওয়ার্ড আনলক করতে কি করবেন?

১। প্রথমে উপরে দেওয়া ফ্ল্যাশ ফাইলটি ডাউনলোড করে নিন।

২। তারপর উপরে দেওয়া spd flash tool টি ডাউনলোড করে নিন এবং usb driver ডাউনলোড করে আপনার কম্পিউটারে ইনস্টল করুন।

৩। তারপর spd flash tool টি ওপেন করুন।

৪। তারপর লোড টাব এ ক্লিক করে ডাউনলোড করা ফাইলটি সিলেট করুন।

৫। start এ ক্লিক করুন এবং আপনার মোবাইল টি usb cable দিয়ে কম্পিউটারের সাথে কানেক্ট করুন।

symphony b24 info:

Card found : 1CAD1D33 , v0146

Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.06

SCRD mode : AUTO

SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Identify [ v1.06 ]

BootMode : FLASH

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device not found!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v1.06 ]

BootMode : FLASH

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

ERROR : Protocol HandShake failed!

Error : Fail to init protocol!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v1.06 ]

BootMode : FLASH

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

ERROR : Protocol HandShake failed!

Error : Fail to init protocol!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v1.06 ]

BootMode : FLASH

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR 6531EFM v2.0 (c)2019

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] : 353363117928320

IMEI[2] : 353363117928338

Done!

Elapsed: 00:00:46

Reconnect Power/Cable!

Operation : Read Flash [ v1.06 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR 6531EFM v2.0 (c)2019

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Platform Version: MOCOR_16A.W17.09.3_Release

Project Version:   SC6531EFM_BAR

MMI Version:       B24_HW1_V4

BASE  Version:     BASE_SVN

HW Version:        V01

12-02-2019 18:09:53

LOG Version:      V1.0.1

UCOM

Saved to : G:\Symphony\Button\symphony_B25_sc6531e_flash_file\MOCOR_16A.W17.09.3_Release.bin

Done!

Elapsed: 00:03:06

Reconnect Power/Cable!

Panasonic P90 mt6737m anroid version 7.0 flash file download

 Panasonic P90 mt6737m anroid version 7.0 flash file download

--------------------------------------------------

Brighton Telecom

__________________________

সঠিক ফাইলের নিশ্চয়তা

----------------------------------------

* hang on logo fixed

* white lcd fixed

* suddenly power off fixed

* unfortunately has stoped work fixed

* monkey virus remove fixed

* dead fixed

* frp lock fixed

* pattern lock fixed

* slow working fixed

* Dead recovery 

------------------------------------------------------------------------------------------------

Brand--------------Panasonic

model---------------P90

cpu--------------------mt6737m

এই ফাইল দিয়ে ১০০% কাজ হবে। ইনশোল্লাহ্‌, 

আপনার মোবাইলের ছবির সাথে মিলিয়ে নিন।

                    

                                                Click here to download                                    

identify info:

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 9 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6737

BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00

BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x93

NAND Flash : NOT INSTALLED

eMMC Flash : 460001154D323145A5D40D42B1134DE4

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM21E

[eMMC] : FLASH_CID : 150100464531324D420DD4A5E44D94B1

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x64FB2921710E7ED114B57B3974D36514

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 9 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6737

BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00

BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x93

NAND Flash : NOT INSTALLED

eMMC Flash : 460001154D323145A5D40D42B1134DE4

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM21E

[eMMC] : FLASH_CID : 150100464531324D420DD4A5E44D94B1

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x64FB2921710E7ED114B57B3974D36514

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Panasonic

ProdName  : Panasonic_P90

ProdModel : Panasonic P90

Device    : Panasonic_P90

AndroidVer: 7.0

MTKxCPU   : MT6737M

MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_esky6737m.35.n

[Read Ok] : preloader_esky6737m_35_n.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : tz1.img

[Read Ok] : tz2.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / esky6737m_35_n / EMMC

Android Info saved

HWConfig Info saved

FW Size : 2424 MiB

Scatter saved to : E:\Panasonic\Panasonic_P90_mt\MT6737M__Panasonic__Panasonic_P90__Panasonic_P90__7.0__alps-mp-n0.mp1-V1.0.2_esky6737m.35.n\

All done!

Done!

Elapsed: 00:10:15

Reconnect Power/Cable!